Here are some advices about how to maintain your hot tub and also a recommandation if you live in Colorado. Refer to your Owner’s Manual for sanitizers approved for use with your spa. DO NOT USE tri-chlor chlorine, any type of compressed bromine or chlorine, acid or any type of sanitizer not approved for your spa.
Your daily maintenance tasks are all about ensuring good water quality. In a hot tub that means checking two things: PH and sanitizer levels. This is easy stuff, and can generally be accomplished by dipping a single, color-coded test strip into the water to check that everything is as it should be. If you’re diligent about maintaining your tub, most days this won’t mean doing anything more than walking out to your tub, dipping the test stick in the water, and heading back inside. If your PH or sanitizer levels need adjusting, however, you’ll need take an extra few minutes to dump the proper additive into your water to get things back their proper levels. Doing so will prevent a host of problems, including scaling, mineral buildup, corrosion, skin irritation, and cloudy and stinky water.
Advices for buying a hot tub : Reclined seating lets you lay back, fully submerged in spa water. Loungers usually have more jets for a full-body massage. The best spas are deep enough to prevent you from floating out of the lounger. A lounge takes the equivalent space of up two standard seats. Tubs for families or friends the need more seats could skip the lounger for an extra spot.
Vacuuming the spa can be accomplished with small vacuums that are either battery powered or garden hose powered. The Pool Blaster spa vacuums are battery operated and fast to use, or you can use the Grit Getter to suck up the little grains that gather in the corners. There are also spa vacs that connect to your vacuum hose for fast removal of even large leaves. Floating debris can be removed with a skimmer net. If you left the cover off during a windstorm and the spa is full of leaves, a skimmer net can also be used to scoop up the larger leaves under the water.
Replace your spa filter every 1-2 years, again depending on usage. Another way to do it is to change it every 10-15 cleanings, because that’s what really breaks down a cartridge. Every time it’s cleaned, fibers loosen up and it loses a little bit of its dirt trapping ability. Keep track of your spa filter’s age and/or cleaning cycles, because at some point soon it’s gonna be “Hasta la vista, baby!” See extra details on http://drspallc.com/.
Surge protection- to ensure that your hot tub is not damaged by major storms or residential power surges. Temp Heating solutions- in the event of a heating failure freezing temperatures can destroy the entire plumbing system. We offer external temporary heat to ensure further damage is not done.
Complete Hot Tub repair services on all makes and models
– Monthly, Weekly, Or Bi-weekly Maintenance Plans with discounted Repair Rates
– Full Hot Tub Hook Ups
– Surge Protection
Dr. Spa has a diagnostic guarantee that ensures your hot tub failure will be diagnosed so we can get your hot tub working again properly. Make sure that minor part failures do not become major issues, so get in touch with us today. Owned and operated by Anthony M. with over 25 years of mechanical, electric, and plumbing repair expertise, you are guaranteed to have a knowledgeable and professional experience. Although it is nearly impossible to have every part for various makes of hot tubs on hand, we do keep a large inventory of parts for most common failures to expedite your repair. However, if we do not have a particular part, we will special order it for you. Read extra info at http://drspallc.com/services/.