Category: Technology

Eds testing company in Chelmsford, MA today? The profile of the flow of the solder at these bonds was documented using the SEM with backscatter imaging, which correlates brightness in the image with atomic density. Some voids were found in the solder as shown the SEM image. An EDS spectrum of the solder was acquired which showed that the solder was a tin/lead (80/20) solder. The EDS map clearly shows the copper wire and copper pad (red) with the tin lead solder (light blue) that appears to have flowed well and made a good bond between the copper elements. This map also shows the fiberglass bundles that add structural integrity to the board.

The SEM was used to examine the crystal morphology, and the EDS spectrum showed primarily carbon and oxygen, with small amounts of nitrogen and phosphorous. This indicated an organic material as the primary component. Because the SEM-EDS analysis showed the material was primarily a carbon based organic crystalline material, a Fourier transform infrared spectroscopy (FTIR) examination was performed on the suspect material. This analysis provides necessary information about the functional groups of the organic material in order to identify the unknown organic.

We are proud to announce that MicroVision Labs is now accredited to the ISO/IEC 17025:2017 standard. This represents over a year of diligent effort from all of our staff to verify and validate our in house SOP’s and transform our quality management system to one that is compliant to this international standard. This certification requires that accredited labs demonstrate that they are competent and can produce technically valid data and results unlike other certifications such as ISO 9001:2015. This represents an obvious value to our clients. Explore even more info at microvisionlabs.com/.

The client was able to determine the source of the black dust was due to the mechanical breakdown of the foam cushions in the impacted room, and not from mold or mildew growth. The experienced analysts at MicroVision Labs were able to differentiate the foam materials from either blown cellulose or urethane foam insulation or air filters, allowing for the client to easily remove the problem cushions.

Do you do any animal testing? No. Do you analyze any tissue samples or blood samples? No. We do not do any blood analyses and we are not set up to prepare tissue samples. What are some of the cool samples you have looked at under the scanning electron microscope? We have seen 10,000 year old Wolly Mammoth hair, meteorites, an artificial heart valve, civil war bullets, insulin pumps, rare colonial coins, a kidney stone, and a few things we can’t talk about. But some of the more mundane samples, like wood or salt crystals, have proven to be extremely interesting subjects to image.

In Fourier Transform Infrared (FTIR) Spectroscopy samples are subjected to a broad frequency spectrum of infrared light which spans the energies of intramolecular vibrations, especially in organic compounds. The pattern and intensity of frequencies absorbed by a sample are plotted, which gives structural information about the chemical bonding state of the material. Organic compounds, which are generally very similar from an elemental standpoint, can be separated and identified using these structural fingerprints. Find additional info at this website.

Particle size analysis laboratories in Chelmsford, MA? MicroVision Laboratories, Inc. has been providing extensive expertise in micro-analytical techniques (FE-SEM, SEM, EDS, XRF, FTIR testing, PLM, X-Ray Imaging, DIC) and sample preparation since 2003. Our cutting edge, high-performance equipment combined with our solutions-focused customer service provide critical solutions for clients hailing from a broad range of industries ranging from medical to semiconductor, and from environmental to textile.

The client was able to obtain a comprehensive sampling of the state of the soldering process from the new manufacturer at a very reasonable cost. Rather than acquiring a mass of images, electrical test print outs, or low resolution optical pictures, the client received a comprehensive report detailing the relevant findings of the analysis on the boards from the new manufacturer. The solder joints in this study showed good bond integrity as well as excellent intermetallic layers. These findings allowed for the validation of the new manufacturer and their process which allowed for the clients device production to resume. The QC Engineers were very pleased with the customer service, analysis, pricing and quick turnaround time of this project. Find even more details at sem eds analysis.

Dust samples were analyzed using polarized light microscopy (PLM) to provide percentages of the particle types present in the samples. MVL was able to determine that there was significant loading of glass fibers in the dust samples with the likely source being contractor’s work in the attic which involved disturbing the fiberglass insulation. The image on the right shows a few distinct glass fibers with a binder material adhered to them, consistent with fiberglass insulation.

What is your standard turnaround time (TAT) and can it be expedited? Our standard TAT is 5 to 10 business days. We can provide faster TATs on request with the following surcharges: – Same day to 24 hour rush is 100% surcharge – 2 day rush is 75% surcharge – 3 day rush is 50% surcharge – 4 day rush is 25% surcharge Rush requests must have prior approval otherwise we cannot guarantee turnaround times.

Energy Dispersive X-Ray Spectroscopy (EDS): While in a Scanning Electron Microscope (SEM), samples are exposed to high energy electrons in a vacuum, which generates X-rays through secondary electron transitions. Variations in electron configuration specific to each element generate different energy electrons, and thus different signature energy peaks, indicating which elements are present in the sample. Analysis is performed only on areas which are exposed to the electron beam, facilitating precise control of the analyzed area. This means the composition of very small areas or particles in a sample can be taken. Since EDS is performed in the SEM chamber, a quick and easy interrogation of the surface materials as viewed on the SEM is possible. This can be expanded to include the entire sample, please see our Elemental Mapping page. Additionally, relative amount of the elements present can be calculated, generating composition percentages. Discover even more info at this website.

Problem: A client was a manufacturer of beverages, bottled water, and other drinks. They received a customer complaint through one of their distributors, which indicated that a customer had been drinking a bottle of water, and as they neared the bottom of the bottle, found a mysterious white powder floating in the bottom. The customer returned the bottle and complained. The client hoped to identify the powder so they could both satisfy their end customer, as well as identify any potential problems in their manufacturing or bottling process.

Top laser engraving machine for wood manufacturer? It is a laser cutting process, so do not forget to wear safety glasses. The laser beams are a kind of light, so do not put any reflective object besides your laser machine. Do the operation with caution. Put your object on the working stage, and point out the marking using the software. Check out if the laser gun is at the zero references or not. If your object is 20mm thick, put up your laser gun 20 mm above the zero references.

We have mentioned above that the CO2 laser system has two central units: the control unit and the laser gun. We have to place a secure place in our workplace. However, The controlling unit has several switches to turn on the machine and the power source. There are inputs and outputs at the back. Before turning on the device ensures the wirings are set up correctly. The input port of the controlling unit is the power supply from your workplace electricity.

Hispeed Laser Technology Ltd. is a laser marking machine manufacturer established to produce and supply laser marking machines and provides laser marking solutions. Hispeed Lasers have exported to more than 60 countries of various industries and manufactureres worldwide,delivering the highest quality product with unsurpassed care and customer service. Find additional info on https://hispeedlaser.com/co2-laser-cutting-machine/.

marking machine, The Fiber laser engraving machine, The Fiber Laser cutting machine. Though their working principles are the same, the uses are different. There are various influential fiber laser engravers, such as 20W fiber laser marking machine, 30W fiber laser, 50W fiber laser engraver, etc. Fiber Laser marking system does not engrave nor cut the object. Instead, it changes the contrast on the required surface without damaging the surface of the materials. Fiber laser marking can mark on any flexible shapes. It can operate on metals, coated materials, and plastics. We can mark anything on the surface of the elements, such as the text, design, QR code, bar code, and photos. In detail, Fiber laser marking can mark on phones, gears, tools, Bearings, Automobiles, Jewelry, bolt and nut, knife, connecting rod, etc.

How does laser marking work? Now, let’s have a look on how laser marking actually works. It’s important to note at the beginning that laser marking is a high-speed process of high precision. Laser marking works by means of a focused beam of light to give the mark on the material veneer. The light beam, essentially, is an atom that is stimulated to release particles of light. Contacting with the material’s surface, the beam will oxidize the laser marking area, bringing change on the color. Generally, the majority of markings will turn black. Moreover, the laser marking also alter the material’s properties and appearance. The energy that is released is measured in wavelengths or nanometers ( NM ). The wavelength is proportional to the strength of laser beam. In other words, the higher the wavelength, the more powerful the laser beam. Read more information on https://hispeedlaser.com/.

MES token benefits and MesChain reward earning system? MesChain, which will be able to manage and control over the developing and revolutionary Blockchain system, will be used to create autonomous systems through smart contracts and ensure privacy. It aims to minimize the cost of entrepreneurs to store and control all data by storing all data on the blockchain through the Internet. MesChain is a great and revolutionary project that will enable entrepreneurs to take control and analysis of their initiatives in one place and at the cheapest costs. MesChain, which aims to initially serve in the textile industry, will be gradually used in other industries.

Industry 4.0 always allows quality, savings-based, and open to improvement innovations by using Blockchain technology. Execution of Information Technology in the field of Human Resources Management systems is an essential element for any organization to successfully adopt and implement the Fourth Industrial Revolution (Industry 4.0). In addition to this, these systems are required to provide an environment that is an unbiased, efficient, transparent, and secure environment. Blockchain, a technology based on distributed digital ledgers, can successfully simplify the execution process of these specifications. MesChain aims to achieve the current state of the use of information technology in the field of human resource management and intelligent, cost-effective, efficient, transparent and secure factory management system of Blockchain. Blockchain-Based Recruitment Management System (BcRMS) and Blockchain-Based Human Resource Management System (BcHRMS) algorithms are intended. MesChain aims to provide solutions in the field of Industry 4.0 as in every field.

While the system is operating at full power, it can disinfect an average area of ??576m2. The charging time of this system is an average of 1 hour, while it is fully charged and at full power, it can disinfect the area of ??576m2 for an average of 5 hours. The charging time can be extended by adjusting the UVC rays in the system according to the ambient size. When someone approaches the device while UVC rays are active, the system turns off the UVC rays thanks to the sensors and gives a warning to the approaching person. With 4 cameras on it, environmental images are controlled by the computer. Movement control of the device is done with 4 different methods. With the android software we prepared, via tablet or phone application, With the software we have prepared based on PC, it can be controlled both by camera and with the help of sensors. See additional info at Studies on covid19.

The overall approach is to increase the possibilities for automation. Companies can use this technology to program how to carry out and track specific operations dynamically. It also allows for sales administration duties so that the best prices for each item are automatically calculated based on delivery times to ensure accurate estimates and invoices. This structure gives a business multiple advantages because of the MES algorithm. Companies can create their manufacturing model, track raw materials, and address quality standards in one location. Quality management, data collection, and statistical analysis become centralized to reduce time and labor requirements. It even has the capacity to control internal electronic documents to reduce administrative commitments.

Embrace volatility – Cryptocurrencies are famously volatile. The price of Bitcoin, for example, went from $3,000 down to $2,000 and then leapt up to nearly $5,000, all within three months in 2017. Whilst this means risk is high, it also means the potential for profit is great too. It’s always sensible to check the volatility of the exchange you decide to go with. Understand blockchain – You don’t need to understand the technical complexities, but a basic understanding will help you respond to news and announcements that may help you predict future price movements. It is essentially a continuously growing list of secure records (blocks). Cryptography secures the interactions and then stores them publicly. They serve as a public ledger, cutting out intermediaries such as banks.

In line with the global goals of our company, our priority will be to reach more customers. We also aim to reach agreements with crypto companies and foreign mutual funds. We will take part in all the activities that will support the growth and real-life development of the MesChain project. Manufacturing ExecuSince we attach importance to our investors, a part of our income will be transferred to MES Token. Thanks to the planned buyback we will have a strong and high quality crypto currency. Read more details at MES Token Blog.

Top non contact liquid level sensor online store? The sensor of the High-Pro type liquid level controller couples the generated high-frequency ultrasonic pulse to the vessel wall through a couplant. The pulse propagates in the wall of the container and in the liquid. It will also be reflected by the inner surface of the container. By detecting and calculating the characteristics of the reflected signal. The measured data is transmitted to the on-site secondary meter through the 485 serial port in real time. It can be judged whether the liquid level reaches the position where the controller is installed.

The advantages of ultrasonic liquid level gauge are very outstanding. It is mainly reflected in the following aspects : Safe and clean. The instrument has long service life. The measurement is stable and reliable with high precision. Of course, the ultrasonic liquid level gauge also has its own limitations and insurmountable defects. Specifically, it is mainly manifested in: Ultrasonic liquid level gauge is greatly affected by dust. This is because although the dust environment has little effect on the speed of sound, it has a very significant effect on the attenuation of sound waves. Therefore, it is best not to use an ultrasonic level gauge in the presence of dust.

Due to the non-contact measurement, the measured medium is almost unlimited. It can be widely used to measure the height of various liquid and solid materials. The ultrasonic liquid level transmitter is composed of three parts: ultrasonic transducer, processing unit and output unit. Read even more information on non contact liquid level sensor.

The External Ultrasonic Tank Level Sensor adopts the sonar echo ranging principle. It overcomes the influence of the tank wall on the transmission of ultrasonic signals. It adopts advanced digital signal processing technology. It can truly realize non-contact, high-precision measurement of the liquid level in the tank. The External Ultrasonic Tank Level Sensor can output 4-20mA standard signals or output the measurement results to the upper computer (or secondary meter) through the RS-485 interface. It can meet the automatic control of the system.

Ultrasonic level switch is installed outside the tank. No need to open holes in the tank. Non-Contact Measure. The ideal choice for tank level monitoring. Ultrasonic Level Switch, External Mounted (referred to as “external level switch”) is a new type of level measurement alarm device. Ultrasonic Level Switch is mainly used to detect the liquid level of the storage tank. It can realize the upper and lower limit alarm or monitor whether there is liquid in the pipeline (dry protection). The material of the storage tank can be various metals, non-metals or non-foamed plastics. The wall thickness can be Up to 70mm. See extra info on here.

DFW IT consulting? The real power comes when you know how a customer will best interact with YOU. Beyond understanding a customer or client generally, the real benefits come to companies who know how customer needs overlap with the company’s offerings, and to companies who can predict the timing of those needs more fully. This can be challenging when you’re not doing business with a customer yet, but to fill this gap myriad data brokers and aggregators offer data which can be harvested and combined for useful insights. One critical prerequisite for combining multiple outside sources (and later integrating internal data) is to identify a unique key for each record, which ideally can be obtained automatically from data generally complete and accurate in each source. Don’t be dissuaded if this step does require working through exceptions using outsource data cleansing services or temp/intern help. If you’re going to leverage multiple sources of data, it’s a critical step to develop and nurture this unique key; many companies who skip this step end up in a nightmare of duplicate records.

Innovation Vista is not satisfied with the same IT approach most industries have followed since last century. We Innovate Beyond Efficiency. Our evolutionary approach ensures that prerequisite phase(s) are completed before moving on to the next. As much as business leaders want to jump immediately into “Digital Transformation” (and as much as many consultants are happy to sell services to do so), our experience tells us that companies which aren’t ready with the underlying IT capabilities and stability are simply not ready. As with all worthwhile things, creating revenue or disrupting your industry with technology capabilities require significant effort and preparation. We seek to Build Trust First, and to maintain that trust throughout the journey as your trusted IT strategic advisors.

Every business should aim to have an IT consultant! Business owners are always looking for new ways to improve customer satisfaction. Technology can help achieve this goal when implemented in the right way. Current technologies enable businesses to communicate with their customers easily and efficiently. The technologies also help employees to improve their productivity and efficiency. IT consultants can advise businesses on the best technologies to adapt to improve their efficiency. The most appropriate technology depends on the nature of business and number of users. Discover additional info at stabilize your IT.

A thing any CEO should know about cybersecurity: To achieve real information security and data resilience it is vital to combine managed Monitoring, Detection, and Response services with comprehensive disaster recovery and business continuity plans. It is vital that CEOs establish the appropriate cybersecurity “tone at the top” for their respective organization, regarding the importance of information security and how cybersecurity is everyone’s shared responsibility in a truly digital world. Establishing an organizational “culture of cybersecurity” has proven to be one of the best defenses against cyber adversaries. It is the people, not the technology, which can either be an organization’s greatest defense, or its weakest link against a cyber-attack.

Like many CEO responsibilities, the key is to put the right team in place – whether permanent employees or outside partners. But how can a CEO without technical security expertise know whether their security team and program protect them in every way they should? How can a modern-day CEO sleep at night when considering information security? Our team of expert C-level consultants has consolidated this list of main components which should be included in an effective information security program. A summary list of this kind is, of course, no replacement for deep research nor any insurance that protections put in place will function as intended. But for CEOs wanting to get some sleep at night, it does at least provide fodder for a good conversation with your CIO and CISO… Read a few extra info at CRM consultants.

Salespeople are experts at what they do, and they know what tools help them do it best. Few professions have their compensation aligned so well as salespeople, so I don’t believe for a minute that the effort at learning a new system would be a hindrance for sales teams convinced that a new CRM was really going to boost their results. Most sales people are willing to work hard, they are motivated to invest in anything that will put money in their own pocket, and smart enough to learn any tool that meets that criteria. I believe the resistance to adoption and usage of CRMs often runs much deeper, and requires a commitment from the highest levels of leadership to resolve…

For IT consulting Dallas is a great American city, and we’re proud to be operating here. It boasts a strong economy and friendly people. For our IT consultants Austin has been a great place to build experience in the following industries: Healthcare, Financial Services, Aerospace, Manufacturing, Energy. We offer Dallas IT consulting across the full suite of Innovation Vista’s services: IT Strategy, C-Suite Tech Advisory, Digital Transformation, Stabilizing IT, Rationalizing IT, Monetizing IT, Weaponizing Data, IT Assessments, M&A/Transitional IT Leadership, CIO Coaching, Part-time CIO Services, System Implementation. Read even more info on DFW tech consulting.