Category: Industrial

Metal zip ties and PG cable glands buying advices? Our ATEX accessories meet the requirements of the European Directive 94/9/EC as required. Here, too, you can choose from a wide range of lock nuts, extensions and reductions as well as seals. In addition, we offer adapter elements and special clamping brackets for our ATEX Ex d/e cable glands to achieve an additional external strain relief.

Cable glands perform a number of essential roles in cable management. Designed to attach and secure the end of an electric cable and the device it’s connected to, cable glands provide earthing, grounding, insulation, bonding and strain relief. They can also be used to seal cables which pass through bulkheads of gland plates.

Pg thread form of a German conduit pipe thread (DIN 40430) Unit: mm The screw thread referred to as a Pg 13.5 is a German DIN standard 40430 conduit pipe thread type. The thread angle is an 80 ° included angle and is similar to the JIS standard JIS C 8305 for thin steel conduit threads. Common applications for cable glands include aerospace, cleanroom, fire protection, industrial, marine, panel or enclosure, power or utility, railway, and telecommunications. Marine glands: Designed for application on ships, offshore mining and drilling settings, or other marine applications. Read more details on PG Cable Gland.

The CMP E1FX/M cable gland is suitable for use with all forms of equipment protection permitted in Zone 1 provided always that the prevailing code of practice, installation and maintenance is observed ie. IEC60079-14. Locate the cable gland Armour Cone ensuring the correct side of the cone is outermost – grooved for braid/tape armour and stepped for SWA cables. Pass the cable through the cable gland until the wire armour is engaged with the cone. Spread the wire armour evenly around the cone.

What is a Barrier Gland? Barrier glands are similar to normal glands, except a compound sealant material is used to ensure the inside of the cable is gas tight as well as the outside. When Should a Barrier Gland be Used? BS EN60079-14 Electrical Apparatus for Explosive Gas Atmospheres Part 14 – Electrical Installations in Hazardous Areas (other than Mines) provides a selection process for deciding if a barrier gland is required. There are various options to consider, however if the hazardous gas require IIC apparatus, or if the volume of the enclosure is greater than 2 litres then it is likely you will need to use a barrier gland. IIC apparatus is generally associated with Hydrogen.

CableGlandsOnline.com offer a wide selection of cable glands and cable ties to fit your needs. All of our cable glands meet IP68 specifications as liquid tight and are resistant to low level acides and alkalis. These cable glands are also designed for install well. Here are you can find a full sizes of all kinds of cable glands. Whether your application requires metric, npt or pg or other applications. You will find what you need here. Source: https://cableglandsonline.com/.

High quality non contact liquid level sensor online store? The Liquid Level Controller is attached to the outside of the tank. Non-contact detection of tank liquid level. Liquid Level Controller supports liquid level alarm, fault alarm, and 485, Modbus, 4-20mA, FoundationFieldBus, PROFIBUS or Hart. Liquid Level Controller is installed outside the tank. The HS-ULC-Pro Liquid Level Controller works based on the principle of ultrasonic waves, and is also called “externally attached liquid level switch. It is mainly used to detect the liquid level of the storage tank, and its sensor (digital probe) acts on the outer wall of the storage tank. It supports upper and lower limit alarms, tanks Body temperature display or monitor whether there is liquid in the pipeline. Liquid Level Controller is suitable for liquid level process control in the pharmaceutical, petroleum, chemical, electric power and other industries.

The advantages of ultrasonic liquid level gauge are very outstanding. It is mainly reflected in the following aspects : The structure is simple. The reading is convenient. It is very easy to install and maintain. Of course, the ultrasonic liquid level gauge also has its own limitations and insurmountable defects. Specifically, it is mainly manifested in: Ultrasonic liquid level measurement is easily affected by temperature. In the actual measurement, the change of temperature will cause the change of sound speed. This will lead to errors in the measurement.

In the measurement, the ultrasonic pulse is emitted by the sensor (transducer), and the sound wave is reflected by the liquid surface and then received by the same sensor or ultrasonic receiver. Through piezoelectric crystal or magnetostrictive device into electrical signals. The distance between the sensor and the measured liquid surface is calculated by the time between the transmission and reception of sound waves. Read more details at https://www.drurylandetheatre.com/hs-ulc-ultrasonic-level-switch-external-mounted/.

The External Ultrasonic Tank Level Sensor adopts the sonar echo ranging principle. It overcomes the influence of the tank wall on the transmission of ultrasonic signals. It adopts advanced digital signal processing technology. It can truly realize non-contact, high-precision measurement of the liquid level in the tank. The External Ultrasonic Tank Level Sensor can output 4-20mA standard signals or output the measurement results to the upper computer (or secondary meter) through the RS-485 interface. It can meet the automatic control of the system.

Ultrasonic Level Switch is not affected by factors such as medium density, dielectric constant, conductivity, reflection coefficient, pressure, temperature, precipitation, etc. It is suitable for various liquid levels in the pharmaceutical, petroleum, chemical, electric power, food and other industries Engineering control. Ultrasonic Level Switch is the ideal choice for the detection of toxic, highly corrosive, and dangerous liquid level. Sino-Inst offers a variety of Radar Level Transmitters for level measurement. If you have any questions, please contact our sales engineers. Read more details at here.

High quality steel workshop buildings construction services by havitsteelstructure.com? The columns and roof beams of steel structure workshops are generally assembled and welded with hot-rolled H section steel or steel plates. The manufacturing accuracy of the H beam, which made of hot-rolled steel, is easy to control. The columns welded from steel plates need correcting after assembly and welding, which can prevent distortion of H section steel due to welding deformation. The building structure that arrives at the construction site is prefabricated, and in the part that is ready for constructed, the installation you need.

Many farmers choose steel structures to build livestock buildings. Because steel structure livestock buildings with the advantage of low maintenance costs and flexible design, they can meet the requirements of the large and bright span. The installation is fast and straightforward. The owners who have less construction experience, they can follow the installation drawings to complete the erection.

The steel frame structure system refers to a frame structure composed of steel beams and steel columns along with the longitudinal and transverse directions of the buildings. The steel beams and steel columns form the structural system that bears and resists lateral forces. Beam flanges, webs, and columns are all fully penetration welded, that is, fully welded nodes; The beam flange and the column are full penetration welded while beam web and column bolted, that is, the welding and bolts mixing joint; The flange and web plate of beam, and column are all bolted, that is, fully bolted nodes. Find even more info on steel warehouse building.

The steel structure has excellent performance and high reliability. Steel is uniform, isotropic. It has a large elastic modulus, good plasticity and toughness. And is an ideal elastic-plastic body. Therefore, the steel structure will not suddenly break and break due to accidental or local overload. It can adapt to vibration loads. The calculation model reflects the mechanical properties of the steel, so the analysis is accurate and reliable. The speed of steel structure construction is about 50% faster than that of concrete structure, which will save a lot of time and cost; the overall weight of steel structure is more than 50% lighter than that of specific construction, and the cost of foundation and transportation will decrease.

Havit Steel located in Zhangjialou Industrial Park, Huangdao District, Qingdao, covering an area of more than 60 acres, which enjoys a favorable geographical location and convenient transportation, only one hour away from the seaport. Our company has advanced production equipment, perfect testing facilities, and a quality management system. The processing and painting workshop covers an area of 20,000 square meters, which equipped with the advanced steel structure production line. From the cutting and welding of steel plate to final rust removal, all numerical control ensures processing accuracy and quality. Read more information on Steel Warehouse Buildings.

Aluminum foil recycling info? The Energy People Save by Recycling Aluminum: Recycling aluminum saves 90% to 95% of the energy needed to make aluminum from bauxite ore. It doesn’t matter if you’re making aluminum cans, roof gutters or cookware, it is simply much more energy-efficient to recycle existing aluminum to create the aluminum needed for new products than it is to make aluminum from virgin natural resources. So how much energy are we talking about here? Recycling one pound of aluminum (33 cans) saves about 7 kilowatt-hours (kWh) of electricity. With the energy it takes to make just one new aluminum can from bauxite ore, you can make 20 recycled aluminum cans.

The main challenge to recycling aluminum foil is that it is often contaminated with food waste. Grease and oils can damage recycling equipment and create an inferior end product, so food-affected waste has to be thrown away (all that food will also cause the foil to smell really bad, which will make the staff at your local recycling center very unhappy). Some communities accept aluminum foil in their recycling bins as long as it is clean. Others are not willing to take that risk. We have some advice for dedicated recyclers who really want to keep their aluminum foil out of landfills. We also share a couple of ways to decrease your use of aluminum foil.

If you’re recycling aluminum foil that you bought and used for storage, separate the foil from the paperboard box and corrugated tube before recycling. If foil is combined with other materials (such as in drink boxes, candy wrappers and yogurt tops) and can’t be separated, you’ll want to throw it away. Foil mixed with other materials is considered recycling contamination. Combine all sheets of foil into one ball. This will keep the material easily separated from other products, and also prevent it from blowing away (aluminum foil is a very light material). See additional details on is tin foil recyclable.

While most recycled aluminum is in the form of cans, aluminum foil is technically recyclable, but there’s a catch: It needs to be clean — that is, free of food residue, as grease or food residue can contaminate the other recyclables during the recycling process. In part because of the issues with contamination, and the reality that most people are unlikely to rinse their aluminum foil before recycling it, some waste haulers will not accept aluminum foil for recycling; the damage soiled aluminum foil does to other recyclables can outweigh the benefit of trying to recycle the aluminum foil.

Recycling Aluminum Makes Use of a Valuable Commodity! According to the International Aluminum Institute, aluminum is infinitely recyclable. Of the 1 billion tons of aluminum ever produced, about 75 percent of that is still in use. Aluminum cans are by far the most valuable items in the municipal waste stream — the value of the recovered aluminum in 2011 more than covers the cost of collection and processing . Because of this, recycling aluminum cans helps to subsidize the collection of a wide variety of other recyclable materials. Read more info at https://www.ablison.com/how-to-recycle-aluminum-foil-and-is-it-biodegradable/.

Best gold invesment in Idaho? Physical precious metals include gold, silver, platinum, palladium and copper. Precious metal bullion is usually made into bars, rounds or coins, and when purchased, the owner takes physical possession of the commodity. For an investment in precious metals to be successful, the investor must wait to sell for the value of the metal to exceed the value at the time of purchase. So why do people invest in physical precious metals?

Test mining will determine if the observed average bulk sample grades of 0.6 opt gold are consistent along the entire strike length of the Mary K Vein at surface. The potential quantity and grade is conceptual in nature, there has been insufficient exploration to define a mineral resources and it is uncertain if further exploration will result in the target being delineated as a mineral resource. A 500 lbsample from surface returned 0.79 ounce per ton.A 2 Kg sample from surface sent to theBureau Veritas laboratory in Richmond, B.C. returned 44.3 g/t with a combined gravity and flotation recovery of 96.3%.

The company plans to develop and test-mine the historical high-grade Mary K mine in Idaho. Bond Resources has signed an L.O.I with the owners of the mineral leases and 450 acre property. Conditions of the underground workings are currently unknown, but additional development and/or rehabilitation is considered straight forward. Elk City is located 33 miles ESE of Grangeville, Idaho. It is the closest town. Elk City is accessed by a well maintained two lane highway (Hwy 14), which follows the south fork of the Clearwater River.

The Mary K mine was first staked on Jan 11908 by Maxwell and Williams.They sunk two shafts and dug cuts along the vein for 3,000 feet.Richard Kleesattel, a mining engineer, picked the mine up in 1915 and began expanding the underground workings.Between 1929 and 1942 Mr. Kleesatteldeveloped at least 2,400 feet of underground workings.The longest is the #4 Level, or Main Access, which is over 2,000 ft long,1,100 ft of it were in high-grade gold mineralization. Discover extra details at gold stocks US.

Deflation is defined as a period in which prices decrease, when business activity slows and the economy is burdened by excessive debt, which has not been seen globally since the Great Depression of the 1930s (although a small degree of deflation occurred following the 2008 financial crisis in some parts of the world).. During the Depression, the relative purchasing power of gold soared while other prices dropped sharply. This is because people chose to hoard cash, and the safest place to hold cash was in gold and gold coin at the time.

Mr. Carrabba is a mining executive with over 42 years of management and operational experience in the resource industry. He has served on boards of several listed companies including Newmont Mining, Key Bank, Lithium-X and Fura Gems. Mr. Carrabba is currently an active board member on NYSE-listed Timken Steel as well as TSX-listed AECON and NioCorp. Read more info on here.

Sanding & Buffing: Encore robotic sanding and buffing systems utilize the Encore multi-headed tool as well as off the shelf sanding equipment to provide robotic sanding and/or buffing to the full exterior surface of vehicles as well as vehicle components/parts: The Encore system integrates automatic paper changers to remove, replace and validate paper changes. Dust removal systems can also be integrated to remove residual material left behind the sanding process. Encore systems offer automatic tool change capabilities to provide additional flexibility for the sanding process. When combined with defect detection the entire process of seek and finesse can be totally automated.

Automation systems spray a PVC or Polyurethane based material onto the rocker panel, sill, and under body to prevent stones and rocks from chipping the paint in this area. Also known as stone guard chip or SGC. TKS is a General Contractor for building industrial manufacturing plants, offering turn-key services including project management, construction site supervision, oversight of skilled trades and subcontractors, quality assurance, start-up, commissioning, and spray trials.

From High-pressure water sprays to De-greasing to Surface Conditioner and Phosphate, and now, Metal Oxide Pretreatment for Aluminum bodies, TKS offers up to 10 different process steps to configure for your application. TKS’ electrical engineering department works with many manufacturers including Spang, Controlled Power, and more. TKS provides a variety of types of anodes: solid, flushing, roof-, wall-, and floor-mounted. We also design and provide the anolyte system. A properly sized and maintained UF system is key to a clean e-coat finish. Along with our patented counterflow innovation, TKS offers a cost-effective ED system. Find additional information at paint shops.

TKS can design heated flash off tunnels for your paint process, using a heater box to provide hot air blow (HAB) to allow for the waterborne paint to set prior to the next coat of paint. Typically followed by a short cooling tunnel with cold air blow (CAB) to return the vehicle to near room temperature before the next layer of paint is applied.

All four major ovens: E-coat oven, Sealer oven, (optional) Primer oven, and Topcoat oven all consist of heat-up and hold zones. In a 3-wet paint booth process arrangement, there isn’t a Primer oven, instead a heated flash off (HFO) is used. Sometimes there are also smaller ovens for black-out and cavity wax. We offer a paint-drying oven that responds to temperature increases in body areas. The oven design will increase heating in zones of thick parts, such as sill inners or pillars where it is difficult to dry paints, while maintaining the temperature of keep-zones with a minimized flow rate to reduce dirt contamination and reduce energy usage.

Integrity is in the forefront of our every business endeavor. How we are perceived by our customers, suppliers and associates will determine our future. Also, how we achieve our goal is as significant as the goal. Therefore, we will conduct ourselves in such a manner as to convey our credo of honesty, fairness and ethical behavior. Discover additional info on https://www.tksindustrial.com/.