Posted on

Street lamp wholesale provider in China

Street light provider 2022? CHZ Lighting helps customers choose the most appropriate led lighting products and offer corresponding technical supports after understanding their overall needs. Customers only need to provide us with some basic engineering information. (Take led street light as an example, the information customers need to offer includes road width, pole height, pole position, pole spacing, average illumination requirement, etc.) Based on the provided information, our designers can then use Dialux simulate lighting effects and offer multiple design options to customers. See more details on led street lighting fixtures.

Flood lighting, also known as the LED spotlight and LED projection light, is controlled by built-in microchips. There are two types of chips, one is the combined power chip and the other is a single high-power chip. The former has a more stable performance, but the later has a large structure and can achieve very high power to offer long-distance and large-area illumination. LED flood light illuminates the surface higher than the surrounding. It is also known as the spotlight. Typically, the best LED flood light can be aimed in any direction and its structure is seldom affected by climates.

The LED tube uses a light-emitting diode as a light source, which has higher luminous efficiency, is more energy-saving, has a longer service life, and is more environmentally friendly. It is the ideal product to replace fluorescent tubes at this stage. The LED tube and the traditional fluorescent lamp are the same in the outer size. There are T5 tube, T8 tube and T10 tube. The length is 0.6m, 0.9m, 1.2m, 1.5m, 1.8m, 2.4m. The installation of the LED tube is very simple. When installing, the original fluorescent lamp is removed and replaced with the LED tube, and the ballast and the starter are removed, so that the 220V AC mains can be directly applied to the ends of the LED tube.

The solar road lighting is powered by a crystalline silicon solar cell. The maintenance-free valve-regulated sealed battery (colloidal battery) Sealed Lead Acid is exceptional in storing energy. The super bright LED lamp is used as a light source and is controlled by an intelligent charge and discharge controller, replacing the traditional utility electric lighting. Outdoor solar street lamp is to convert sunlight collected during the day into electric energy for storage, and then use the stored electric energy as LED lighting at night.
Read more info on https://www.chz-lighting.com/.

As a century-old famous school, Central China Normal University has always attached great importance to physical education. Through continuous innovation of sports activities, efforts have been made to improve the construction of sports infrastructure, create a good campus sports culture atmosphere, and achieve healthy and happy growth of students. Recently,CHZ-LIGHTING successfully completed the lighting renovation project of some venues in the Sports Center of Central China Normal University, and customized a complete set of systematic lighting solutions for it to help create a healthy and energy-saving sports lighting environment.

The following are some of the specifications used to differentiate street lights from other sources of light. Operating Temperature: This refers to the optimal temperature at which these lights operate. This specification is key to all outdoor lamps. The lamps are usually helpful at night. Therefore, on average, these lamps operate at a low temperature of up to 2 degrees Celsius. The manufacturers have significantly factored in the fact that the lights can be installed in areas that experience winter seasons each year. The modular LED street light uses a die-cast aluminum shell, which has strong heat dissipation capacity and greatly improves the heat dissipation efficiency. In addition, the LED lamp beads inside the luminaire are separated and dispersed, which reduces the heat accumulation inside the luminaire and is more conducive to heat dissipation. LED street lights have good heat dissipation and natural long service life.

Posted on

Cutting discs online provider UK 2022

Arc welders provider UK in 2022? Generators, Welder Generators & Engine Driven Welders are a key part of our range. Brands such as MOSA, Genset, Pramac Generators, Shindaiwa Generators & more trust us to promote their brands. Welding Supplies Direct offer welder generator hire nationwide. Welder generators, otherwise known as Petrol Welders, Genset welders, or genny welders, are a great tool for mobile welders as it allows the user to weld anywhere and everywhere. In addition to this they can utilise the generators auxillary output to power small power tools such as angle grinders and chopsaws. Read more information at https://www.weldingsuppliesdirect.co.uk/welding-equipment/welder-generators.html.

If you’re looking for a reliable cutting disc that can handle a variety of materials, this tool is a great option. This 10-pack of disc grinder cutting wheels is perfect for cutting metal and stainless steel surfaces. With thin metal cutting discs, you can easily get into tight spaces, and they are durable enough to handle even the toughest jobs. Whether you’re a professional contractor or a DIY enthusiast, these disc grinder cutting wheels are sure to come in handy. It’s made of durable aluminum oxide grains that provide an aggressive cutting action and longer service life. Due to the reinforced double fiberglass mesh, this disc meets the MPA en12413 standard. The Panlen Metal&Stainless Steel Cut-Off Disc for Angle Grinder is the perfect accessory for anyone with a 4.5 inch disc grinder. With this size, the cutting discs reach up to 13,000 RPM and 80M/S speeds. You can cut carbon steel, pipe, iron, copper and all other ferrous metals. It is made from tough abrasive materials, this disc can easily take on even the most challenging projects.

This is a professional MIG welder by Lincoln Electric with brass-to-brass connections, solid metal wire drive and a 220v / 240 volt input. Every feature is of professional quality. The case is much thicker metal than the Chinese machines, the circuit board is enclosed and it uses stainless steel hinges. These details matter when you put food on the table with your welder. With a welding range between 30 and 180 amps, the Easy MIG 180 can weld on everything from thin sheet metal on a car grille all the way up to frame modifications on the same vehicle, including metal up to ½-inch thick. At 130 amps, the duty cycle is 30 percent, making it unlikely you’d ever reach the point for most jobs where the automatic thermal shutoff kicks in. The Easy MIG 180 comes with a Harris regulator and the gun has a 10-foot connection. Lincoln Electric has an arc-starting technology that’s almost completely spatter-free, giving you time to dial in just the right settings for the task at hand. Lincoln includes both gasless and MIG nozzles, backing the Easy MIG 180 with a 3-year warranty.

Look for ways to create more efficiencies in the welding process. This includes examining such things as wire diameter, wire feed speed, voltage, travel speed, gas type, transfer mode, etc. For instance, if the shop is currently welding with a short arc process and a 75/25 blend of shielding gas, it may be more effective to switch to a different gas and a spray mode of transfer. Or, a change in process may be warranted based on the condition of the part. If there is oxide on the part, it may be easier to change to a process that will overcome contamination problems rather than try to clean each part before welding. Your welding supplier should be up to date on the latest technology and be able to advise you on new processes, machinery and consumables that can optimize welding at the shop. In some cases, it may be better to double bevel a joint to prepare it for welding rather than single bevel it. It is recommended to double bevel any material that is more than 3/4″ in thickness. Just this simple change in procedure can save quite a bit in weld metal. On a 3/4″ thick piece, a double bevel will use 1.45 lbs. per foot of weld metal while a single bevel will use 1.95 lbs. per foot.

How to pick a welder tips: Fan on demand: Lowers running costs and reduces contamination to internal components. The fan kicks in when it’s needed, rather than running all day. Printed Circuit board protection: If the machine’s PCB’s are protected from dust & kept away from the fan, reliability will increase. Some manufacturers’ have the parts that need cooling in a duct type housing & the PCB isolated separately. Step voltage settings: If you’re looking at step voltage conventional MIG with multiple power settings – “the more the better!”

Angle grinders are formidable tools and need plenty of power to spin cutting or grinding discs at high velocity. Look for corded angle grinders that spin between 11,000-12,000 rpm or cordless angle grinders that spin between 7,500-9,000 rpm. The best angle grinder should be powered by a 700W motor at minimum if corded or, if cordless, an 18V battery that has a capacity of at least 4Ah. The grinding wheel diameter on most angle grinders is usually 115-125 mm, although heavy-duty angle grinders can accommodate grinding tools over twice that size. Noise and vibration levels are important aspects to consider with this type of power tool. Often the best angle grinders are the least noisy with lower vibration levels. This is especially so with cordless versions with brushless motors but they are more expensive, particularly if you include the cost of a battery and charger.

A few advices about welding equipment, MIG and TIG welders, plasma cutters. Welding faster may sound appealing, but aside from practice, there are few shortcuts when creating a strong weld. In fact, unless a situation calls for a fast-moving weld, there’s a good chance that slow and steady is the way to go. An online search for ways to weld faster, will yield either descriptions of the ways automated welding has increased welding speed or press releases from companies who claim their gas or electrode holds the key to improving welding speed. In other words, it can seem like spending a lot of money is the only way to weld faster. However, for those looking for some ways to save time on their welding projects, there are some ways to weld faster for certain projects. While it’s not always a good idea to find a way to weld faster, there are situations when welding faster may produce a better product or a few simple changes can speed up the time on task.

Successfully Prevents Toxic Gas and Can Replace Any Ventilation Fan. Maxx Air HVHF is more about preventing toxins from traveling around your home or workplace than it is about regulating temperature. This is the perfect fume extractor if you don’t want ventilation fans installed around your property. You can use it basically for any sort of welding and soldering job. As it produces massive 2000 CFM airflow, you don’t have to worry about its performance! KNOKOO is famous for producing lightweight fume extractors within an affordable price range. The FES 150 is a worthy inclusion in their list of products. This portable weld fume extractor absorbs smoke and purifies the air as well with its 3-layered filter.

Although this is a regular drill press and not a magnetic drill press, you can also use this one for steel drilling. The motor has a rating of ½ HP and in order to change the drill speed for metal drilling, you have to change the belt and pulley combination setting to the slowest speed. As a drill press, the RIKON 30-120 does not have the best performance. The feeding wheel is not well made and is awkwardly situated. Your chances of getting the back of your fingers caught between the feeding wheel and the belt tensioner are quite high and it is very painful. The packaging of this drill press is poor as well. If you are looking for a tool that you can use for drilling steel exclusively, we recommend that you stick to magnetic drill presses. Regular drill presses can work great for wood, plastics, and steel, but they don’t have magnets and is impossible to use for vertical and overhead applications.

The ESAB group is owned by Colfax Corporation. Over 100 years after the company was founded, ESAB serves a global market for welding and cutting equipment. The group is organized in the regions Europe, North America, South America, Asia/Pacific and India. ESAB is represented in almost every country by subsidiaries or agents. Sales and support is established in 80 countries and there are 26 manufacturing plants across four continents. Visit the web site of your nearest ESAB office to find out more. Customers Talk, We Listen – The voice of the customer will always drive the development of our strategic plans and actions. Living this value is done by getting Customer Input and Expectations, at every opportunity, and by differentiating ourselves in How We Deliver to our customers. Innovation Defines Our Future – Individual and organizational creativity will drive breakthrough ideas for technology, products, solutions, and processes. We live this value by providing differentiated customer solutions, creating products and services that improve quality of life and environmental stewardship through Creative Thinking, and by understanding What Innovation Brings.

These welding tables are manufactured to the highest standards in Poland, Europe by GPPH. GPPH’s range of welding benches and tables are laser cut for precision and are used in every branch of industry. These welding tables offer perfect flatness (+/- 0.5MM) & are made from 15MM thick S355J2+N grade steel. The hole system that these welding benches offer make precise construction a much quicker process when used in conjunction with the optional tool sets. Batch work processing times can be cut in half when you eliminate the measure and exact angle arrangement of individual parts – this makes producing the same item simple and fast.

Another quality machine from Hobart that has 25A for 190A output range so you can weld up to 5/16 in steel. The power input is only 230V so you won’t be able to use this on your standard household power outlet. The 190 is a wise choice if you’re considering buying a 140A welder but think you may want to upgrade in the future. It’s not much more expensive and you can always turn the 190 down but you can’t turn a 140 up. There’s loads including for the price, you get power, durability, a good duty cycle and all the extras you need to get started, including .030 contact tips, 0.30 flux cored wire and gas gauges. See the full review here.

It’s another gasless MIG welder manufactured by Wolf. The Wolf MIG 130 yields the output range of 50? – 120? that enables welding metalware up to 6mm thick. It is possible thanks to 2 toggles that provide a varying output power for a specific part. In addition, you can set one of 10 wire feed speeds, so that welding could be fully under your control. As for the welder unit, it will let you control all processes and stability of operation thanks to handy indicator lights. Once the tool has been used for too long and requires a break from work, a corresponding light will flash up warning you to make a pause. However, owing to the built-in cooler, the runtime of the welder is still pretty long and should be enough for most jobs. Being small and lightweight like it is, the Wolf 130 welder’s output makes only 13A which won’t be sufficient for tough welding tasks unless you’ve been planning to replace the wiring in your place anyway. The shipping package isn’t wide too and includes only a spool of a 0.8mm wire.

UK market pick: The Ironman is a high-powered welder that is very different from the other welders on this list! Boasting more power, the best duty cycle, and a weight that dwarfs the others, the Ironman is nearly without compare. Obviously, this is not the machine that a budding welder should vie for. It’s super heavy duty and will set the consumer back $2000. It welds from 24 gauge to an amazing ½ inch thickness for steel. The Ironman can handle steel, stainless steel, and aluminum. It is capable of Flux core. The “fan-on-demand” cooling system works as needed, offering up a reduced use of power. There are twelve voltage power settings. The Ironman has infinite adjustment for wire speed.

The following tips may help: Use the right type of regulator for the gas cylinder. Take care to inspect the regulator before attaching to the cylinder. If the connections aren’t properly made, perhaps you might be using the wrong device. Thus, it is wise to replace it with the right one. Close the valve of the cylinder, as well as release the pressure from the regulator, before removing it from a cylinder. Remove the regulator from the cylinder while transporting it to another location.

It’s also worth looking into how your welder will handle things like short-circuiting. If a short circuit issue occurs while you’re welding, you don’t want a surge of power to ruin your work. Fortunately, there are many welding companies that implement strategies in their devices to eliminate the risks of short circuits. To choose the correct portability, size and weight for your welder, you’ll need to think about what you’ll need the machine for. If you’re going to be carrying it around a lot, then you need something that’s going to be highly portable and lightweight. Just make sure that a reduction in weight doesn’t mean that you end up compromising on power or performance. See more info at this website.

Posted on

The climb of a music conducting professional : Paducah’s Logan Blackman

Utah’s Logan J. Blackman or the ascent of a music orchestra conducting expert: Nardolillo says Blackman’s piece is nicely paired with the major work on Friday’s concert, Mahler’s “Titan” symphony. Both are rooted in deep, compelling emotions that will be clear to the audience. For Blackman, it’s emotion rooted in a painful memory, but he says he has been able to revisit it without being overwhelmed by the pain of his parents’ deaths. “I was 15 when they passed away, and since then, I have always dealt with it very well,” he says. “I’ve never really understood how. It’s not easy, by any means, but every time I hear it, every time I think about it, it makes it more meaningful. Personally, on my own side, it’s a good way to hash out thoughts and feelings that I might not have already hashed out.” Read extra information at Logan J. Blackman.

What first inspired you to pursue music? Logan J. Blackman : Believe it or not, Davy Jones from Pirates of the Caribbean Dead Man’s Chest. The summer it came out, I was captivated by the famous scene where he played his theme at the organ. I had a very basic knowledge of music, and we had some keyboards around. So I started playing around and eventually figured the piece out by ear. That led me to wanting to take organ lessons, which eventually led to a great love of music and a career that would keep going nearly two decades later!

John Nardolillo has appeared with more than 30 of the country’s leading orchestras, including the Boston Pops, the National Symphony, and principal orchestras of Seattle, San Francisco, Detroit, Atlanta, Dallas, Milwaukee, Utah, Columbus, Indianapolis, Oregon, Fort Worth, Buffalo, Alabama, Louisville, Missouri, North Carolina, Toledo, Vermont, Columbus, Omaha and Hawaii. He also recently conducted concerts at the Kennedy Center in Washington, D.C.; the Kimmel Center in Philadelphia; and Carnegie Hall in New York. Nardolillo made his professional conducting debut in 1994 at the Sully Festival in France, and has since made conducting appearances in the United States, France, Germany, Italy, Norway, Sweden, Denmark and China. He has led major American orchestras in subscription series concerts, summer and pops concerts, education concerts and tours, and for television and radio broadcasts. In 2004 Nardolillo joined the faculty at the UK School of Music, where he is currently serving as the director of orchestras.

When Bernstein composed the Cinchester Psalms, he specified that the second Psalm be sung by either a boy soprano or a countertenor. The voice of a boy soprano imparts a sense of innocence and spiritual purity, and a well-trained countertenor can sing with unrestrained clarity within the vocal range of a contralto or mezzo soprano. His voice resonates a distinct timbre simply because it is a male voice singing outside the limits of its ordinary range. Although Bernstein’s Psalms are sung in Hebrew, we are all familiar with the biblical text. Jefferson Johnson conducted this demanding choral work as the combined choruses admirably rose to the occasion. The first Psalm calls for us to live joyfully; the third pleads for us to live in unity; the second, bridging the first and third, encourages us to travel through life with faith and courage. And countertenor Joseph Kingsbury delivered this Psalm with mesmerizing articulation, tonality, and agility: “The Lord is my shepherd, I shall not want.”

With a passion for composing, Blackman finds writing his own work very rewarding. “After I put down the last note, I love looking back at the work as a whole and admiring what I have created. To me that is one of the greatest feelings in the world!” Blackman, who chose UK for his studies based on Lexington and the school’s orchestra and faculty, is excited for the opportunity to share his music with a Bluegrass audience at the next UK Symphony Orchestra concert. “This is the greatest honor of my life so far. It is an honor to premiere a work with such a distinguished ensemble, but it is an even greater honor to bring it to life with my friends and colleagues. I am very grateful for this amazing opportunity.” See even more details at Logan Blackman.

Posted on

Hausmiete Hohe Lith in Cuxhaven schnell, komfortable und transparente herbst 2022

Hausmiete residenz Hohe Lith Cuxhaven komfortable, schnell und transparente 2022? Residenz Hohe Lith Cuxhaven in direkter Strandlage: Die Ferienanlage Hohe Lith in Cuxhaven bietet komfortable Ferienwohnungen in Cuxhaven Duhnen mit vielen Annehmlichkeiten. Das Haus liegt in unmittelbarer Nähe zum Sandstrand und zum Meer. Der Dorfkern von Duhnen mit seinen Geschäften und Restaurants ist fußläufig zu erreichen. In der Nähe des Hauses befindet sich der schöne Sandstrand, an dem Sie im Sommer entspannen und baden können. Sehen extra information auf https://www.ferienwohnung-duhnen.de/hohe-lith-cuxhaven/.

Rund 100 Kilometer nördlich von Bremen lockt die Seestadt Cuxhaven mit einer Vielzahl an maritimen Attraktionen. Ausflüge in den Nationalpark Wattenmeer und zu den deutschen Nordseeinseln, entspannende Spa-Behandlungen, historische Stätten und mehr haben es auf unsere Liste der Top Ten der Sehenswürdigkeiten und Aktivitäten in Cuxhaven geschafft. Die Alte Liebe wurde 1733 als Bootssteg und Wellenbrecher erbaut und 1982 zur Aussichtsplattform umgebaut. Seitdem ist sie Cuxhavens beliebteste Flaniermeile für einen sonnigen Tag. Das Deck gewährt einen Blick auf die Bucht und vorbeifahrende Schiffe, deren Namen und Herkunft über einen Lautsprecher angesagt werden.

Wie viel Exklusivität benötigen Sie und welche Extras sind Ihnen gerade recht? Wenn die Sehnsucht nach der erfrischenden Schönheit und dem erholsamen Klima der Nordsee Sie mal wieder überkommt, Sie aber genug haben von Traumferienwohnungen, in denen Sie nur das Nötigste vorfinden, dann sollten Sie unbedingt einen Blick auf unsere Traum-Ferienwohnungen Cuxhaven beziehungsweise Duhnen werfen, die sich unter anderem im Strandpalais Duhnen und in der Residenz Meeresbrandung befinden.

Aus Ihrer Traum Ferienwohnung im Strandpalais Duhnen können Sie herrliche Sonnenuntergänge über dem Wattenmeer erleben. Empfehlenswert ist es auch, an einer der Wattwanderungen teilzunehmen, bei denen Sie nicht nur viele Muscheln, Krebse und Würmer sehen werden, sondern auch mehr über das Weltnaturerbe erfahren. Duhnen selbst lädt zum Bummeln an der Strandpromenade oder dem neu gestalteten Weg auf dem Deich ein. Sie können von Duhnen bis Cuxhaven auf diesem Weg spazieren gehen oder mit Inlinern fahren.

Die Ferienwohnung Küstentraum liegt am Ortsrand von Duhnen im Dünenenweg 25, direkt am Deich. Ruhig und doch zentral gelegen! Genießen Sie den besonderen Charme des Ferienapartments und des Balkons mit dem herrlichen Meerblick auf die Insel Neuwerk und die einzigartigen Sonnenuntergänge im Wattenmeer, mehr über den Küstentraum erfahren Sie hier. In fußläufiger Nähe zum Strand von Duhnen und zum Thalassozentrum Ahoi liegt das Strandpalais, dessen moderne architektonische Gestaltung bemerkenswert ist. Hier haben wir vier Traum-Ferienwohnungen mit gehobener Ausstattung und fantastischem Seeblick für Sie reserviert. Von der Einbauküche mit Induktionskochfeld und Mikrowelle über das Badezimmer mit ein oder zwei Waschbecken und Waschmaschine bis hin zum Wohn- und Essbereich ist alles mit Blick auf Ihr Wohlbefinden eingerichtet und liebevoll gestaltet. Mehr Informationen über das Strandpalais Duhnen erhalten Sie hier.

Urlaub an der deutschen Nordseeküste mit unseren traumhaft schönen Residenzen für den kleinen oder den großen Geldbeutel, für Familien, Einzelreisende oder Gruppen. Frischer Fisch, maritime Köstlichkeiten und Freizeitaktivitäten, die ebenfalls ganz im Zeichen des Wassers stehen, lassen an der Nordsee keine Langweile aufkommen. Naturschauspiele wie Ebbe und Flut oder ein Besuch des Niedersächsischen Wattenmeers, das zum Weltnaturerbe der UNESCO ernannt wurde, bieten unvergessliche Erlebnisse für Jung und Alt. Ausgedehnte Strandwanderungen oder einfach nur die Seele in der Sonne baumeln lassen – Unsere Ferienwohnung an der Nordsee erfüllen jeden individuellen Wunsch.

Wir bieten Ihnen hier die Möglichkeit, sich zu unserem Newsletter anzumelden. So bekommen sie mehrmals im Jahr viele gute Last Minute Angebote für Ferienwohnung Duhnen. Melden Sie sich für unseren Newsletter an, profitieren Sie von exklusiven Rabatt-Angeboten und lassen Sie sich für Ihren nächsten Urlaub inspirieren! Beide Traum Feriendomizile befinden sich in erster Reihe direkt am Cuxhavener Strand. Nur wenige Meter trennen die Ferienwohnung Duhnen vom Deich, der auch für Menschen mit Gebehinderungen leicht zu „erklimmen“ ist. Ein unverbauter Blick, eine angenehm frische Meeresbrise und eine ruhige Straße zeichnen die Lage unserer Ferienwohnung Duhnen aus. Sehen meht information auf ferienwohnung-duhnen.de.

Unsere Ferienwohnungen in Duhnen liegen in direkter Strandnähe an der Nordsee. Sie können sich also auch einfach die Badetasche schnappen und einen herrlichen Tag am Strand verbringen. Ausklingen lassen Sie den Tag dann in geselliger Runde in der Gastronomie rund um den Dorfbrunnen. Oder ganz entspannt auf Ihrem Balkon oder Ihrer Terrasse – von dort also, wo Sie einen unverbauten Ausblick auf den leuchtenden Sonnenuntergang des Wattenmeeres haben.

Posted on

Enzo Zelocchi or the rise of a film producer

Get to know Enzo Zelocchi and some of his work: Describe the differences you faced while working amidst COVID. It’s definitely an interesting time. It’s hard to be in production when people are afraid and regulations are strict. I just switched strategies and ways to work. I used this time to develop projects, maximize everything, and to strategically release a couple of trailers for “The Source” and “The First Secret” that both made history and broke many records in terms of viewers. Discover extra details on https://filmdaily.co/indie-film/enzo-zelocchi-starlight-man/.

He opened up about My Little Princess, which he wrote, directed, produced, and starred in. The film earned a glowing review from Digital Journal, and rightfully so. “I gave a piece of my heart in that project,” he admitted. “It was an interesting journey and a very good experience for me. I watched everything through the eye of a young father and I looked at this tragedy of how a family lives through it, which is horrible.” “I put so much hard work and sweat in it. I tried to be very spiritual with it, and I wanted it to be authentic. The message in My Little Princess is love, faith, and family and I wanted to project that. I was very blessed since it earned me a lot of awards. Movies are like miracles, especially when they are successful enough to be seen,” he said.

Enzo Zelocchi is best known for his success with the movie My Little Princess (over 33 movie awards at film festivals and a 2010 semi-finalist for an Academy Award nomination), but also for his consideration to star as the new Zorro in Zorro Reborn, the development for the first Hollywood Hispanic superhero “Starlight Man – The First Secret” and as executive producer and vice president of development at Crossroads Entertainment. He is also listed as a producer of Find Me Guilty, starring Vin Diesel, which was directed by the Academy Award winner Sidney Lumet; and as producer of Shadow of Doubt, starring Melanie Griffith and Tom Berenger.

Enzo Zelocchi producer

How did the project of The Source come to be? Tell us about your involvement with it. The Source was originally conceived as a movie franchise. Due to COVID-19, the entertainment industry changed quite a bit in terms of distribution (hopefully temporarily), so I turned it into a TV show. I originally wrote The Source in 2018, and when COVID-19 started, I began to deeply develop all the projects that I thought would be a good fit for this current time in our society. I’m basically the creator, writer (along with others on the team), producer, and lead actor. When the trailer of The Source received over 200 million views, I understood that I was on the right track.

Enzo Zelocchi is an Italian/American, Hollywood film producer, actor and businessman, an award winner as actor, producer, social Media influencer, businessman and founder of A-Medicare with over 33 movie awards in Film Festivals and semifinalist for an Academy Award nomination with the project “My Little Princess”.

What was your first acting job? Enzo: One of the biggest Italian directors, Carlo Vanzina, decided to cast me for the role of a villain for a TV series in Italy on channel 5. It was like a dream for every actor. I didn’t have to audition. What happened is that my agent in Italy recommended me. They called the assistant director, and they scheduled a meeting with him the following day. He liked me. We spoke a little bit. The director wanted to see me. He looked me in the face and said, ‘I like him. The role is yours.’ This is what I love about auditioning. You speak to the director; he gets a vibe from you if you can play the character, using his imagination. That’s the dream of every actor. You get the chance to feel the person and he understands what you can do and what you cannot. Discover even more details at https://ja.m.wikipedia.org/wiki/エンツォ・ゼロッキ.

Enzo Zelocchi was honored over 5 Times as Best Actor, 4 Times Best Outstanding Performance, 4 Times Best Director, 3 Times Best Writer and Best Producer and at the California Film Awards 2010 he won Grand Winner for Best Family Film. Other awards include the following film festivals: in 2010 Hollywood Variety Movie Awards as Best Actor and Best Outstanding Performance, in 2011 at the Golden Indie Movie Awards also as Best Actor and Best Outstanding Performance; as well as at the Hong Kong Best Film Awards (hongkongbestfilmawards.com) as Best Actor, Best Outstanding Performance and Best Original Content.

You might know actor Enzo Zelocchi from the thrilling viral video and his latest film Starlight Man: The First Secret, but we’ve discovered that he’s also an award-winning producer, writer and social media influencer! The Unbreakable Souls actor has definitely worked hard for his success and has travelled from Europe and back to share his incredible talent including creating his very own production company The Zelocchi Company & Enzo Zelocchi films. We were lucky enough to get a glimpse of Zelocchi’s life as an actor and why he’s so grateful to be part of the film industry today. Let’s take a look!

Posted on

Push pull connectors provider today

Circular push pull connector manufacturer by MocoConnectors? Shenzhen MOCO Interconnect Co., Ltd, is a high-tech enterprise with nearly a decade experience of developing, designing and manufacturing push-pull self-locking connectors. With a number of authoritative patents,MOCO can supply eco-friendly qualitied and cable assmbly solutions for you. With 4000 square meters premises for research & development and production. Under the excellent management and great efforts of innovation for many years by MOCO team, we have developed a lot of popular products such as push pull connectors, bayonet connector and military connector. See even more information on https://www.mococonnectors.com/products-19952.

NDT is a testing techniques used by industry to evaluate the properties of material, component, structure or system for characteristic difference or welding defects and discontinuities without causing damage to the original part. Non-destructive Testing cable is used for Ultrasonic flaw detection equipments, ultrasonic probes, transducers, ultrasonic thickness gauges, etc. NDT cables including BNC to microdot, BNC cable to BNC, BNC to FFA.00, FFA.1S to subvis, and so on. The standard length is 6ft (2m). Custom length available. RG174, RG58, RG59 coaxial cables are frequently used to make NDT cables.

Electrical cables are used to connect two or more devices, enabling the transfer of electrical signals or power from one device to the other. Cables are used for a wide range of purposes, and each must be tailored for that purpose. Cables are used extensively in electronic devices for power and signal circuits. Long-distance communication takes place over undersea cables. Power cables are used for bulk transmission of alternating and direct current power, especially using high-voltage cable. Electrical cables are extensively used in building wiring for lighting, power and control circuits permanently installed in buildings.

Military connectors are used for extreme aeronautical and tactical service applications. MOCO Interconnector provide Military circular connector (i.e. D38999, MIL-DTL-5015), micro rectangular connector (i.e. J30J-15TJL, MIL-DTL-83513) and bayonet connector (i.e. YLH Y50 series). They are applied in military communication, computers, navigation, radar, airborne, marine guidance control and electronic warfare. The most popular military connector is MS5015 series. The main advantages are as following: ease of engagement and disengagement; Allowing power and signal lines in one mil spec connectors; Rugged mechanical performance under harsh environment conditions; Compatible with international famous brands; Multiple size and pins for your choice; Several shell styles: straight, right angle, wall receptacle, box receptacle and cable plug; Very favorable price; Interlock and captive nut to prevent inadvertent disassembly. Read even more information on mococonnectors.com.

The material is durable enough to withstand high temperature, strong corrosion resistance, waterproof and moisture-proof, antibacterial, and the tail nut and the round nut of the socket are color-coded to prevent mis-insertion. Multi-key selection to avoid mixed insertion between similar connectors. In terms of pin configuration, we choose single-pin and multi-pin and electronic coaxial mixed pin configuration, which greatly saves panel space and insertion time for you. Instruments involved: monitor, ventilator, anesthesia machine, color Doppler, blood pressure detector, infrared therapy instrument, electrophysiology, CT, high-frequency electrosurgical knife, endoscope, defibrillator, dental scaler, electric shock devices, MRI machines, etc.